Missing an upper front incisor
The upper central and lateral incisors are at the front of your smile. Denticor fills this space with a specific missing tooth with a single dental crown, not a plastic cover for the whole smile.
Your tooth selection
Choose new teeth
You don’t need to explain to anyone why you’re missing teeth, nor do you need to apologise for it. With Denticor, you can smile and speak again without covering your mouth. Get started today - show us which teeth you’re missing and enter the width of the gap.
Start here
Choose the simplest method
You don’t need to read the whole guide on your mobile. Either upload a photo/screenshot of your smile, or mark your teeth by hand on the clear diagram.
Photo is optionalAlways check your selectionNo registration required
i
You can use the dental assessment straight away
Mark the missing teeth in red or use the AI assistant directly in the overview. A photo is optional.
Solutions by tooth
You don’t need to know the tooth number. You just need to know where the gap is.
Denticor diagnostics are designed for a specific single missing tooth or a specific gap. Below are the most common situations described in text form, so that both people and search engines can understand them – not just a clickable map of teeth.
Missing a canine
The canine has a distinctive shape. Check its position on the map and follow the guide for that tooth. The removable piece needs suitable neighbouring teeth on both sides; a photograph cannot confirm their stability.
A tooth is missing behind the canine
The tooth immediately behind the canine is a premolar, effectively a lateral molar. With Denticor, the aim is not to cover the teeth, but to fill a specific lateral gap.
Missing back molar
With a posterior molar, the gap is wider and there is greater load during occlusion. The diagnosis mainly checks the number of missing teeth and the support provided by the surrounding teeth.
The last molar is missing
The last molar is unique because there may not be another adjacent tooth behind it. If support is missing on one side, Denticor may not have sufficient mechanical interlock.
Several adjacent teeth are missing
If two or more adjacent teeth are missing, the diagnosis isn’t just about numbers. It also considers whether there are any teeth remaining on either side of the gap that the replacement can be anchored to.
Practical notes: This guide is also helpful when you describe your situation in everyday language – a missing front tooth, how to replace a missing tooth, I’m missing a molar, or a tooth is missing behind the canine. You don’t need to know the technical name or the tooth number.
This is what the result looks like
A clear summary of the selected teeth, recommendations and the next step, all in one overview.
What AI looks for in a photo
Visible gap, upper or lower arch, front/side/back area and number of missing teeth.
Guides for your situation
The output will link to a library of specific procedures based on the confirmed selection.
When AI won’t help
If the selection cannot be safely determined, Denticor AI will ask you to add to or adjust the selection.
What happens to the photo
The photograph is used to propose tooth positions for you to check. Denticor does not retain the image after analysis; provider processing is explained in the privacy information.
Personalised recommendation
Once you’ve confirmed your selection, you’ll receive a precise solution based on the number of teeth and a step-by-step guide tailored to your situation.
How Denticor AI works
The AI will make the initial selection. You confirm it. You always have the final say.
Denticor AI proposes missing-tooth positions from your photograph. Where extra checking is needed, a different AI model can also read it. The map shows a proposal for you to correct and confirm. If the readings disagree, you decide the final selection. The package is based on the teeth you confirm; you enter your own gap measurements when ordering.
Marking according to the photoA second AI reading when neededRecommendation only after your confirmation
1AI scans the photoDesign for missing teeth
2A second reading when neededA different AI model
3Mark the teeth in redYou resolve any disagreement on the map
4You confirm your selectionOnly then will you be advised
What the AI looks for in your photo
It’s not a black box
Denticor AI does five specific things – in this order. It reads the first three from the photo; the last two only happen after you’ve confirmed your selection. The result must pass all five for the system to recommend a course of action.
Find a gap
It detects the exact location where a tooth is missing. If the photo does not clearly show the gap, it will indicate this and open the dental overview for manual marking.
Classifies the type of tooth
It recognises which tooth is missing: an incisor, canine, premolar or molar.
Identifies the dental arch
Upper or lower? Each arch has different parameters: gravity, bite forces and complexity.
Checks whether adjacent teeth are present
Based on the selection of teeth you have confirmed, the system checks whether there are adjacent teeth on both sides of the gap.
Illustrated instructions provided
Following the online diagnosis, the system will suggest the most suitable package. If you choose Denticor, you’ll receive detailed illustrated instructions after placing your order.
Procedure library
Guides for your situation
The system recommends a guide based on the positions and combinations of missing teeth. For some combinations, it shows an illustrative guide explaining the same fitting principle.
View the full advice section →When AI diagnosis cannot help
Honest, with no feigned recommendations
AI isn’t a miracle. In some situations, it will say outright: ‘I can’t assess this reliably.’ Without pushing a product that wouldn’t help you.
The photo is blurred, dark or poorly lit
The AI will either ask you for a better photo or switch you to the standard diagnosis with a diagram.
The tooth is covered by the tongue or a finger
The AI will pause the analysis and alert you that it needs a clear view of the gap.
End gap without an adjacent tooth on one side
Denticor has nothing to catch on. AI will say so straight away and recommend sorting out the support with the dentist first.
Visible inflammation, swelling, bleeding or a fresh wound
Do not fit Denticor over inflammation, swelling, bleeding or a fresh wound. Ask a dentist when the area has healed sufficiently. A photograph cannot confirm gum health or healing.
Complete edentulism in the jaw
Denticor supports up to 6 missing teeth per order, with no more than 4 adjacent teeth in one gap. Each gap needs suitable neighbouring teeth on both sides. For more extensive tooth loss, consult a dentist about a different solution.
In all these cases, you will receive a specific message: ‘The AI was unable to reliably assess your situation’ and a recommendation on what to do next. No fake recommendations, no ‘we’ll send you something anyway’. If Denticor can’t help you, we’ll tell you.
What happens to your photo
How your photograph is processed
Denticor processes the photograph for this analysis and does not keep the image afterwards. The AI providers' processing conditions are explained in the privacy information. Using a photograph is optional.
If you’d like even less, use the diagram. You don’t even need a photo there.
Photo processing
Analysis, then your confirmationThe photograph is sent to the AI service over an encrypted connection. The proposed positions are then shown for you to check and confirm.
Photo retention
Not retained by DenticorNot in the persistent database, not in an accessible location. No one has external access to it.
Sharing
No public sharingNot to other customers, not to partners, not to analytical tools, not to dentists. Only the text result of the analysis and the IP address remain in the database to protect against misuse.
Who’s keeping an eye on the AI
There are real people behind the AI
The scenario library is not an AI invention. It has been written, verified and signed.
Ing. Michal Spišák
AI diagnostics developerAuthor of the verified procedures and architect of the entire AI pipeline. His signature is behind every scenario.
PharmDr. Marianna Žitňanová, PhD.
Professional supervision15 years in pharmaceutical research and development. Reviews medically sensitive wording and recommendations.
Mgr. Mária Spišáková
Professional supervision40 years in clinical pharmacy. A second pair of independent eyes for every sensitive claim.
AI does not exceed the limits professionally set by these three individuals.
Frequently Asked Questions
The most important answers in one place
Is the AI really accurate for my specific case?
The photo assistant prepares a preliminary marking of missing teeth. You check it on the tooth map, correct any mistakes and confirm the selection yourself. The recommendation is generated from the teeth you confirm. If the photograph is unclear or the situation is unusual, use manual selection or contact us for help. A photograph does not establish clinical suitability.
Will the AI still give me a recommendation even if Denticor isn’t suitable?
The recommendation uses the tooth positions you confirm and checks whether neighbouring teeth are present. It does not diagnose inflammation, judge healing or confirm that supporting teeth are stable. Do not use Denticor on a fresh wound, with inflammation or loose supporting teeth, or for a gap with no neighbouring tooth on one or both sides.
What if I have an unusual tooth or a rare condition?
If the AI cannot unambiguously classify the photo into the scenario library, it will return the result ‘atypical situation – human consultation required’ and offer you a telephone contact. You can call directly: +421 903 890 097.
Why AI and not just a standard form?
Two reasons. First: a photo captures more than a text form. Both you and the AI can see it. Second: the AI recognises the tooth without you needing to know the medical terms. You don’t need to know whether it’s a premolar or a canine.
Can I speak to a person instead of an AI?
Yes. Please call +421 903 890 097 on weekdays from 8.00 am to 7.00 pm. Michal or a member of the team will advise you in person – even if you don’t end up buying Denticor.
What will happen to my photo?
Denticor does not retain the photograph after analysis. AI provider processing is explained in the privacy information and in the section about your photograph. The final selection is always yours to check and confirm.
How many times can I use the diagnostic tool?
Virtually no restrictions. Photo diagnostics has only a safeguard against misuse – 100 analyses in 24 hours, which you will never reach with normal use. Classic diagnostics with a diagram has no limit at all – you can repeat it as many times as you like.
Ready to find out your situation?
Start by describing it in your own words or, if you prefer, upload a photo.